×
This is the optional category header for the Suggestion Box.
Savvycan with due and canshield.
- purplesprout
-
Topic Author
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
6 years 2 weeks ago #192
by purplesprout
Savvycan with due and canshield. was created by purplesprout
Hi ,
I'm very much a newbie, so lease be gentle.
I have an arduino due with a can shield v1.2. can I use this with savvycan and what alterations
will I have to make to the code to get it to work ?
Thanks
I'm very much a newbie, so lease be gentle.
I have an arduino due with a can shield v1.2. can I use this with savvycan and what alterations
will I have to make to the code to get it to work ?
Thanks
Please Log in or Create an account to join the conversation.
- collink
-
- Offline
- Administrator
-
Less
More
- Posts: 60
- Thank you received: 12
6 years 2 weeks ago #193
by collink
Replied by collink on topic Savvycan with due and canshield.
I believe it will work but I don't know for sure what hardware you have exactly. Can you provide a URL for the CAN shield you are using? The GVRET sketch should work but there might be some pin modifications to do. The mods would likely be minor.
Please Log in or Create an account to join the conversation.
- purplesprout
-
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
6 years 2 weeks ago #194
by purplesprout
Replied by purplesprout on topic Savvycan with due and canshield.
Thank you Collin.
This is the shield - www.elecfreaks.com/wiki/index.php?title=CAN-BUS_Shield
It works with the arduino example " can bus receive", but I can't get it to work with GVRET - i could well be
getting something wrong .If you've any suggestions I'd be grateful to hear them.
Thanks again
This is the shield - www.elecfreaks.com/wiki/index.php?title=CAN-BUS_Shield
It works with the arduino example " can bus receive", but I can't get it to work with GVRET - i could well be
getting something wrong .If you've any suggestions I'd be grateful to hear them.
Thanks again
Please Log in or Create an account to join the conversation.
- kaipyroami
-
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
5 years 9 months ago - 5 years 9 months ago #212
by kaipyroami
What Arduino are you using?
GVRET is made for the ARM based Due platform.
Sorry missed the above posts.
GVRET uses the on-board CAN transceiver correct?
The shield you are using is running CAN through the MCP2515 which is using a different CAN library and pinout.
Replied by kaipyroami on topic Savvycan with due and canshield.
GVRET is made for the ARM based Due platform.
Sorry missed the above posts.
GVRET uses the on-board CAN transceiver correct?
The shield you are using is running CAN through the MCP2515 which is using a different CAN library and pinout.
Last edit: 5 years 9 months ago by kaipyroami.
Please Log in or Create an account to join the conversation.
- kaipyroami
-
- Offline
- New Member
-
Less
More
- Posts: 4
- Thank you received: 0
5 years 9 months ago #213
by kaipyroami
Replied by kaipyroami on topic Savvycan with due and canshield.
You wan to find a MCP2551 breakout and wire it to the Due CAN pins.
You might be able to do it through the shield you already have.
www.amazon.com/MCP2551-HI-SPD-Transceive...-Board/dp/B01LW41L50
You might be able to do it through the shield you already have.
www.amazon.com/MCP2551-HI-SPD-Transceive...-Board/dp/B01LW41L50
Please Log in or Create an account to join the conversation.
- purplesprout
-
- Offline
- New Member
-
Less
More
- Posts: 6
- Thank you received: 0
5 years 9 months ago #214
by purplesprout
Replied by purplesprout on topic Savvycan with due and canshield.
Thanks a lot !
I'll give it a try
I'll give it a try
Please Log in or Create an account to join the conversation.
Time to create page: 0.071 seconds
- You are here:
-
Home
-
Forum
-
Main Forum
-
Suggestion Box
- Savvycan with due and canshield.