×
This is the optional category header for the Suggestion Box.
Interpret frames not happening
- Skandashree
- Topic Author
- Offline
- New Member
Less
More
- Posts: 1
- Thank you received: 0
3 years 10 months ago #331
by Skandashree
Interpret frames not happening was created by Skandashree
Hi,
I created a dbc file first and then loaded .trc files. Ones I select interpret frames,it is not displaying.
I created a dbc file first and then loaded .trc files. Ones I select interpret frames,it is not displaying.
Please Log in or Create an account to join the conversation.
- collink
- Offline
- Administrator
Less
More
- Posts: 60
- Thank you received: 12
3 years 10 months ago #332
by collink
Replied by collink on topic Interpret frames not happening
Obviously it should be interpreting when you do those steps. The things to check are:
1. Make sure it really does have the DBC file loaded.
2. Ensure you start with the default of "associated bus" = -1, "Matching criteria" = Exact.
3. Unclick "Interpret frames" and re-select it. You should see the DBC message names appear next to any frame ID it can interpret.
1. Make sure it really does have the DBC file loaded.
2. Ensure you start with the default of "associated bus" = -1, "Matching criteria" = Exact.
3. Unclick "Interpret frames" and re-select it. You should see the DBC message names appear next to any frame ID it can interpret.
Please Log in or Create an account to join the conversation.
Time to create page: 0.033 seconds
- You are here:
- Home
- Forum
- Main Forum
- Suggestion Box
- Interpret frames not happening